LAT 47.8185° NLON 117.5722° WAREA SPOKANE COUNTY, WA
NINE MILE FALLS · WASHINGTON
Prairie & Urban

METAL ROOFSFOR NINE MILE FALLS,WASHINGTON.

Energy-Efficient Metal Roofing for the Inland Northwest

Crew Experience
50+ YRS
Distance
72 MI
Warranty
50 YR
RESPONSE · 24 HRS
Get Your Quote
01 / 05
Prairie & Urban
NINE MILE FALLS · SPOKANE COUNTY

Energy-Efficient Metal Roofing
for the Inland Northwest

The Inland Northwest prairie corridor — from Coeur d'Alene through Spokane and down to the Palouse — presents a different set of roofing challenges than the mountains. Wide-open exposure means sustained wind loads that can peel back improperly fastened shingles. Summer hailstorms can destroy an asphalt roof in minutes. Urban and suburban properties often have HOA requirements that demand a specific aesthetic. And with energy costs rising every year, the thermal performance of your roof directly impacts your monthly bills. Metal roofing addresses every one of these concerns. Impact-resistant steel panels shrug off hail that would total a conventional roof. Modern metal shingle profiles replicate the look of cedar shake or architectural shingles to satisfy even the strictest HOA design guidelines. Reflective coatings reduce cooling costs by up to 25% in summer, and the superior insulation compatibility of standing seam systems keeps heating bills down through long prairie winters.

Nine Mile Falls clings to the Spokane River and the edge of Riverside State Park, a bedroom community for Spokane with a river-canyon character all its own. Most of our work here is residential re-roofs on the older homes near the falls and newer construction in the Seven Mile and Suncrest subdivisions. The river-canyon microclimate produces its own freeze-thaw and wind patterns that make a 50-year metal roof a smarter bet than a 15-year asphalt install.

Metal Roof Idaho installs metal roofing throughout Nine Mile Falls and the surrounding Spokane County area. Located 72 miles from our Sandpoint headquarters, Nine Mile Falls sits well inside our primary service territory.

02 / 05
Why Metal Here
BUILT FOR WASHINGTON

What mountain
country demands.

— B.01

Impact-resistant

steel withstands hail and sustained wind loads

— B.02

Metal

shingle profiles meet HOA aesthetic requirements

— B.03

Reflective

coatings reduce summer cooling costs up to 25%

— B.04

Energy-efficient

insulation compatibility for lower heating bills

04 / 05
Real Review
VERIFIED · FACEBOOK

Transforming the entire look of my home.

From start to finish, Brandon Ritchie and his team showed professionalism and attention to detail that were truly impressive. They replaced my old roof and installed a beautiful new roofline, transforming the entire look of my home. The quality of their artistry is evident, and I do not doubt that my new roof will stand the test of time.

Kirk MickelsenFacebook · January 2025
REVIEW · 01
Free Consultation · 24-Hour Response

Metal roofing in Nine Mile Falls.

Free on-site assessment. Honest timelines. Answers within 24 hours — crew based in Sandpoint, working Nine Mile Falls and the whole Spokane County area.

Get Your Quote(208) 505-8808
Response
< 24 Hours
Territory
ID · WA · MT
Based
Sandpoint, ID
05 / 05
Common Questions
NINE MILE FALLS · FAQ

Questions we
hear most.

— Q.01

Can a metal roof withstand hailstorms in the Inland Northwest?

Yes, metal roofing is one of the most hail-resistant roofing materials available. Steel panels can withstand impacts from hailstones up to 2 inches in diameter without damage. While a single hailstorm can total an asphalt roof, a metal roof shrugs off the same storm with zero damage and no insurance claims.

— Q.02

Are there metal roof options that meet HOA requirements?

Absolutely. Modern metal shingle profiles replicate the look of cedar shake, slate, or architectural asphalt shingles so closely that most HOAs approve them without issue. These profiles deliver the traditional aesthetic your neighborhood requires while providing the 50-year durability and fire resistance that shingles simply cannot match.

— Q.03

How much can a metal roof reduce energy costs?

Metal roofing with reflective coatings can reduce summer cooling costs by up to 25% by reflecting solar heat away from your home. In winter, the superior insulation compatibility of standing seam systems helps reduce heating costs. Homeowners in the Spokane and Coeur d'Alene area typically see a noticeable reduction in their annual energy bills.

— Q.04

Is a metal roof noisy in rain?

No. Modern metal roofs installed over solid decking with proper underlayment are no louder than any other roofing material during rain. The solid roof deck, synthetic underlayment, and attic insulation absorb sound so effectively that most homeowners report no noticeable difference from their previous asphalt shingle roof.

— Q.05

How does a metal roof handle high winds on the prairie?

Standing seam metal roofing is rated for wind speeds of 110-150 mph, far exceeding the wind resistance of asphalt shingles. The interlocking panel design and concealed-fastener system prevent wind uplift that commonly peels back shingles during the sustained wind events common across the Inland Northwest prairie corridor.

Free Consultation

Tell us about
your roof.

Five fields, two minutes. Our crew responds within 24 hours with an honest assessment — no high-pressure sales, no bait-and-switch pricing.

Licensed & Insured
Free On-Site Estimates
50+ Year Warranty
Financing Available
Prefer to talk? Call (208) 505-8808

Response < 24 Hours · Licensed & Insured · Sandpoint, ID

Call Metal Roof Idaho at (208) 505-8808 for a free metal roofing estimate in Nine Mile Falls, Washington.
Tap to call(208) 505-8808Get Quote